Express 2500 V8-4.8L (2007)
1. Install the new sealing washers.
2. Install the evaporator inlet hose in to the vehicle.
3. Install the evaporator inlet hose to the evaporator.
Notice: Refer to Fastener Notice.
4. Install the evaporator inlet hose retaining nut (1).
Tighten the nut to 16 N.m (12 lb ft).
5. Install the evaporator inlet hose fitting to the front evaporator tube.
Tighten the fitting to 16 N.m (12 lb ft).
6. Install the screw into evaporator hose clip (1).
Tighten the fitting to 6 N.m (53 lb in).
7. Install the coolant recover reservoir.
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
9. Leak test the fittings of the components using the J 39400-A.