Express 2500 V8-4.8L (2007)
1. Recover the refrigerant.
2. Remove the coolant recovery reservoir.
3. Remove the suction line nut (1) from the accumulator.
4. Remove the rear suction line nut (2) if equipped with rear air.
5. Raise the vehicle. Refer to Vehicle Lifting.
6. Remove the suction line bolt from the compressor.
7. Remove the suction line from the vehicle.
Installation Procedure
1. Install the suction line into the vehicle.
Notice: Refer to Fastener Notice.
2. Install the suction line bolt to the compressor.
Tighten the bolt to 35 N.m (26 lb ft).
