Express 2500 V8-4.8L (2007)
1. Install the power steering cooler to the vehicle.
Notice: Refer to Fastener Notice .
2. Install the power steering cooler mounting bolts.
Tighten the bolts to 5 N.m (44 lb in).
3. Connect the power steering cooler hose to the power steering gear.
Tighten the hose fitting to 33 N.m (24 lb in).
4. Connect the power steering cooler hose to the power steering pump.
5. Lower the vehicle.
6. Bleed the power steering system. Refer to Power Steering System Bleeding .
7. Remove the drain pan from under the vehicle.
Power Steering Cooler Pipe/Hose Replacement (GT5)
Power Steering Cooler Pipe/Hose Replacement (GT5)
Removal Procedure
