Express 2500 V8-5.3L VIN T (2005)
5. Enable the park brake cable automatic adjuster.
6. Adjust the park brake system.
Park Brake Cable Equalizer Replacement
Park Brake Cable Equalizer Replacement
Removal Procedure
1. Disable the park brake cable automatic adjuster.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the equalizer.
Installation Procedure
1. Install the equalizer.
2. Lower the vehicle.
3. Enable the park brake cable automatic adjuster.
4. Check the adjustment.
Disabling the Park Brake Cable Automatic Adjuster
Disabling the Park Brake Cable Automatic Adjuster
Before any components of the parking brake system are serviced, the following procedure must be followed. Two technicians are required to perform
this procedure: one inside the vehicle and one outside the vehicle.