Express 2500 V8-5.3L VIN T (2005)
Throttle Cable/Linkage: Service and Repair
ACCELERATOR CONTROLS CABLE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the air cleaner assembly.
3. Disconnect the accelerator cable from the throttle body lever.
4. Remove the accelerator cable from the cable bracket.
5. Unclip the accelerator cable from the engine sight shield mounting bracket and the generator bracket.
6. Remove the left instrument panel (IP) insulator.
7. Disconnect the accelerator cable retainer (3) from the accelerator pedal lever (2).
8. Squeeze the accelerator cable cover tangs (1) and push the cable through the dash panel.
9. Remove the accelerator cable.
INSTALLATION PROCEDURE