Express 2500 V8-5.3L VIN T (2005)
3. Connect the electrical connector to the washer pump.
4. Remove the cap on the washer pump and connect the washer hose to the washer pump.
5. Position the washer solvent container into the locating holes in the chassis.
6. Install the washer solvent container with the bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 10 N.m (89 lb in).
7. Install the upper fender support bar.
8. Fill the washer solvent container.
9. Close the hood.
