Express 2500 V8-6.0L (2008)
Notice: Refer to Fastener Notice .
4. Install the intermediate shaft bearing lower brace retaining nut.
Tighten the nut to 30 N.m (22 lb ft).
5. Install the intermediate shaft bearing bracket retaining nuts.
Tighten the nuts to 30 N.m (22 lb ft).
6. Install the upper intermediate shaft to the intermediate shaft bearing retaining bolt.
Tighten the bolt to 30 N.m (22 lb ft).
7. Install the intermediate shaft seal upper retaining screws.
Tighten the screws to 2 N.m (18 lb in).
8. Install the charged air cooler. Refer to Charged Air Cooler Replacement .
9. Reposition the cruise control module (3) and install the cruise control module mounting nuts (2), if equipped.
Tighten the nuts to 5 N.m (44 lb in).