Express 2500 V8-6.6L DSL Turbo (2010)
Rear Door Interior Handle: Service and Repair
Rear Door Inside Handle Replacement
Rear Door Inside Handle Replacement
Removal Procedure
1. Remove the right side rear door trim panel. Refer to Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door) (See: Rear Door
Panel/Service and Repair/Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door))Rear Side 60/40 Door Trim Panel
Replacement - Right Side (E24, 60 Door) (See: Rear Door Panel/Service and Repair/Rear Side 60/40 Door Trim Panel Replacement - Right Side
(E24, 60 Door)).
2. Remove the rivet (4) at the rear edge of the rear door inside handle.
3. Slide the rear door inside handle forward.
4. Remove the rear door inside handle from the right rear door.
5. Remove the lock rods (3) from the rear door inside handle.
6. Remove the rear door inside handle from the right rear door.
Installation Procedure
1. Install the rear door inside handle to the right rear door.
2. Install the lock rods (3) to the rear door inside handle.
3. Align the tabs on the handle with the slots in the door.
4. Slide the inside handle rearward in order to engage the inside handle with the slots in the door.
5. Install the rivet (4) at the rear edge of the rear door inside handle.
6. Install the right side rear door trim panel. Refer to Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door) (See: Rear Door
Panel/Service and Repair/Rear Side 60/40 Door Trim Panel Replacement - Right Side (E24, 40 Door))Rear Side 60/40 Door Trim Panel
Replacement - Right Side (E24, 60 Door) (See: Rear Door Panel/Service and Repair/Rear Side 60/40 Door Trim Panel Replacement - Right Side
(E24, 60 Door)).