Express 2500 V8-6.6L DSL Turbo (2010)
Hood Shock / Support: Service and Repair
Hood Hold-Open Rod Replacement
Removal Procedure
Warning: Refer to Hood Hold-Open Device Warning (See: Service Precautions).
1. Raise and support the hood.
2. Remove the bolt (1) retaining the hood support rod (2) to the vehicle.
3. Remove the support rod (2) from the vehicle.
Installation Procedure
1. Install the support rod (2) to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the bolt (1) in order to retain the hood support rod to the vehicle and tighten to 11 Nm (97 lb in).
3. Remove the alternate support.
4. Close the hood.
