Express 2500 V8-6.6L DSL Turbo (2010)
License Plate Bracket: Service and Repair
Front License Plate Bracket Replacement
Front License Plate Bracket Replacement
Removal Procedure
1. Remove the bolts that retain the front license plate bracket to the bumper.
2. Remove the front license plate bracket from the bumper.
Installation Procedure
1. Install the front license plate bracket to the bumper.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the front license plate bracket retaining bolts to the bumper and tighten to 3 Nm (27 lb in).