Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the left side rear door upper weather-strip to the door.
2. Press the retainers in the left side rear door upper weather-strip into the holes in the door.
Side Door Opening Weatherstrip Replacement
Side Door Opening Weatherstrip Replacement
Removal Procedure
1. Remove the hinge pillar upper garnish. Refer to Upper Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim Panel/Service
and Repair/Upper Pillar Garnish Molding Replacement).
2. Remove the hinge pillar lower garnish molding. Refer to Lower Pillar Garnish Molding Replacement (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Lower Pillar Garnish Molding Replacement).
3. Remove the passenger side front corner garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement - Right Side (See: Interior
Moulding / Trim/Trim Panel/Service and Repair/Center Pillar Upper Garnish Molding Replacement - Right Side).
4. Remove the passenger side body side trim panel. Refer to Body Side Trim Panel Replacement - Right Side (See: Interior Moulding / Trim/Trim
Panel/Service and Repair/Body Side Trim Panel Replacement - Right Side).
5. Remove the side door stepwell mat. Refer to Front Side Door Step Mat Replacement (See: Interior Moulding / Trim/Scuff Plate/Service and
Repair).
6. Remove the retainers at the lower corners of the side door opening weatherstrip.
7. Pull the side door opening weatherstrip from the door opening pinch-weld flange.
