Express 2500 V8-6.6L DSL Turbo (2010)
Fan Shroud: Service and Repair
Engine Coolant Fan Upper Shroud Replacement
Engine Coolant Fan Upper Shroud Replacement (Diesel)
Removal Procedure
1. Remove the surge tank. Refer to Radiator Surge Tank Replacement (See: Coolant Reservoir/Service and Repair/Radiator Surge Tank
Replacement).
2. Remove the charge air cooler inlet and outlet hoses. Refer to Charge Air Cooler Inlet and Outlet Duct Replacement (Inlet) (See: Powertrain
Management/Fuel Delivery and Air Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and Outlet
Duct Replacement (Inlet)) Charge Air Cooler Inlet and Outlet Duct Replacement (Outlet) (See: Powertrain Management/Fuel Delivery and Air
Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charge Air Cooler Inlet and Outlet Duct Replacement (Outlet)).
3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Engine/Tune-up and Engine Performance Checks/Air
Cleaner Housing/Service and Repair).
4. Disconnect the fan clutch electrical connector, if equipped.
5. Remove the intake air heater. Refer to Intake Air Heater Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Intake Air
Heater/Service and Repair).
6. Disconnect the cross car harness at buss bar on right core support.
7. Position cross car harness out of way.
8. Remove the transmission oil indicator.
9. Remove the engine oil indicator.
10. Remove the engine oil fill cap.
11. Remove the 2 upper fan shroud to core support bolts.