Express 2500 V8-6.6L DSL Turbo (2010)
Note: Inspect for any worn or damaged hoses and replace as necessary.
10. Slide the hose clamp (1) downward and remove the turbocharger coolant feed hose (3) from the turbocharger coolant feed pipe (2).
Installation Procedure
1. Position the turbocharger inlet cooling hose/pipe to the vehicle.
2. Using NEW brass seals (2), finger-tighten the turbocharger coolant feed pipe bolt (1) to the turbocharger.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the turbocharger coolant feed pipe retainer bolt (3) and tighten to 10 Nm (89 lb in).
4. Tighten the turbocharger coolant feed pipe bolt (1) to 25 Nm (18 lb ft).
