Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the fuel pressure relief valve to the left fuel rail and tighten to 100 Nm (74 lb ft).
2. Install the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Powertrain Management/Glow Plug
System/Glow Plug Control Module/Service and Repair/Glow Plug Control Module Replacement).
3. Prime the fuel system. Refer to Fuel System Priming (See: Powertrain Management/Fuel Delivery and Air Induction/Service and Repair/Fuel
System Priming).
4. Start the engine.
If the engine does not start, repeat the above step.
5. Inspect the fuel system for leaks.
6. Install the engine cover. Refer to Engine Cover Replacement (See: Access Cover/Service and Repair).
