Express 2500 V8-6.6L DSL Turbo (2010)
Idler Pulley: Service and Repair
VIN 6
Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the drive belt. Refer to Drive Belt Replacement (See: Drive Belt/Service and Repair).
2. Remove the bolt (1) from the right side idler pulley.
3. Remove the idler pulley.
4. Remove the bolt (2) for the center idler pulley.
5. Remove the idler pulley.
6. If equipped with dual generators, remove the bolt from the left side idler pulley.
7. If equipped with dual generators, remove the idler pulley.
Installation Procedure