Express 2500 V8-6.6L DSL Turbo (2010)
Oil Filter: Service and Repair
VIN 6
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Position a suitable drain pan under the oil pan drain plug.
3. Remove the oil drain plug.
4. Allow the oil to drain completely.
5. Clean and inspect the oil pan drain plug, replace if necessary.
6. Clean and inspect the oil pan drain plug sealing surface, replace the oil pan if necessary.
7. Wipe any remaining oil from the drain plug hole and reinstall the oil pan drain plug until snug.
8. Position a suitable drain pan under the oil filter