Express 2500 V8-6.6L DSL Turbo (2010)
8. Measure the valve installed height using a ruler. Measure from the base of the valve spring to the top of the valve. Refer to Engine Mechanical
Specifications (See: Specifications/Service Limits & General Specifications).
9. Install the remaining spring and other components as necessary.
10. Install the cylinder head. Refer to Cylinder Head Replacement - Left Side (LLM) (See: Cylinder Head Assembly/Service and Repair/Cylinder
Head Replacement - Left Side) and/or Cylinder Head Replacement - Right Side (LMM) (See: Cylinder Head Assembly/Service and
Repair/Cylinder Head Replacement - Right Side).
