Express 2500 V8-6.6L DSL Turbo (2010)
8. Position a suitable drain pan under the oil filter
9. Remove the oil filter (1).
10. Ensure that the oil filter gasket is still on the old oil filter, if not remove the oil filter gasket from the adapter.
Installation Procedure
1. Apply clean engine oil to the NEW oil filter gasket.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the NEW oil filter (1) and tighten after contact plus 1 to 11/4 turn.
3. Tighten the oil pan drain plug (1) to 84 Nm (62 lb ft).
4. Remove the oil drain pan from under the vehicle.
5. Lower the vehicle.
6. Fill the engine with new engine oil. Refer to Approximate Fluid Capacities (See: Specifications) and Fluid and Lubricant Recommendations
(USA and Canada) (See: ).