Express 2500 V8-6.6L DSL Turbo (2010)
8. Install the junction block cover (1).
9. Install the drivers seat. Refer to Driver or Passenger Seat Replacement (See: Body and Frame/Seats/Service and Repair/Driver or Passenger Seat
Replacement).
10. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and Charging/Battery/Battery
Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
Accessory Wiring Junction Block Replacement
Accessory Wiring Junction Block Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Starting and
Charging/Battery/Battery Cable/Negative/Service and Repair/Battery Negative Cable Disconnection and Connection).
2. Press tabs (1) inward to lift and remove the small junction block cover (2).
