Express 2500 V8-6.6L DSL Turbo (2010)
4. Install the coolant air bleed covers (313) and seals (308), if required.
5. Install the coolant air bleed cover bolts (312), if required and tighten to 12 Nm (106 lb in).
6. Install the radiator vent inlet hose (2) to the coolant air bleed pipe fitting.
7. Position the radiator vent inlet hose clamp (1) at the coolant air bleed pipe fitting.
8. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement ().
9. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service
and Repair/Procedures/Cooling System Draining and Filling (Static Fill)) Cooling System Draining and Filling (Vac N Fill) (See: Engine,
Cooling and Exhaust/Cooling System/Service and Repair/Procedures/Cooling System Draining and Filling (Vac N Fill)) Cooling System Draining
and Filling (Static Fill LGH) (See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Procedures/Cooling System Draining and
Filling (Static Fill VIN L)).
