Express 2500 V8-6.6L DSL Turbo (2010)
5. Disconnect the power steering cooler hose (2) from the steering gear (1).
6. Cap the power steering cooler ends in order to prevent the entry of dirt.
7. Remove the power steering cooler mounting bolts.
8. Remove the power steering cooler from the vehicle.
Installation Procedure
1. Position the power steering cooler in the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the power steering cooler mounting bolts and tighten to 5 Nm (44 lb in).
3. Connect the power steering cooler hose (2) to the steering gear (1) and tighten the fitting to 34 Nm (25 lb in).