Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the fuel pressure relief valve to the left fuel rail and tighten to 100 Nm (74 lb ft).
2. Install the glow plug module and bracket. Refer to Glow Plug Control Module Replacement (See: Glow Plug System/Glow Plug Control
Module/Service and Repair/Glow Plug Control Module Replacement).
3. Prime the fuel system. Refer to Fuel System Priming (See: Fuel Delivery and Air Induction/Service and Repair/Fuel System Priming).
4. Start the engine.
If the engine does not start, repeat the above step.
5. Inspect the fuel system for leaks.
6. Install the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
