Express 2500 V8-6.6L DSL Turbo (2010)
5. Remove the oil pump drive gear and crankshaft sensor reluctor. Do not damage the crankshaft reluctor teeth.
Note: Do not remove the reluctor from the oil pump drive gear unless replacing the reluctor or the oil pump drive gear. The reluctor is timed to
the gear and once removed the correct timing will be lost.
6. Remove the crankshaft reluctor to oil pump drive gear bolts.
7. Inspect the crankshaft reluctor for the damage, bent teeth, being bent or warped.
8. Inspect the oil pump drive gear for damaged or worn teeth.
9. Inspect the oil pump drive gear crankshaft pin for wear.
10. Inspect the groove of the crankshaft pin in the oil pump drive gear for wear.
11. Replace any parts that are damaged or worn.
Installation Procedure
