Express 2500 V8-6.6L DSL Turbo (2010)
5. Position the heater inlet hose/pipe to the engine.
6. Install the heater inlet hose bracket to the generator bracket stud (2) and install the bracket nut (3).
Tighten the nut to 9 Nm (80 lb in).
7. Install the heater inlet hose to the fuel filter adapter stud (1) and install the bracket nut (4).
Tighten the nut to 9 Nm (80 lb in).
8. Install the oil level indicator tube bracket (2).
9. Install the oil level indicator tube bracket bolts (1).
Tighten the bolts to 21 Nm (15 lb ft).
10. Install the oil level indicator tube bolt (3).
Tighten the bolts to 21 Nm (15 lb ft).
