Express 2500 V8-6.6L DSL Turbo (2010)
1. Install the relay rod to the vehicle.
2. Install the relay rod to the pitman arm and idler arm.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the new relay rod to the idler arm retaining nut and tighten to 63 Nm (47 lb ft).
4. Install the new relay rod to the pitman arm retaining nut and tighten to 63 Nm (47 lb ft).
5. Install the inner tie rods to the relay rod.
6. Install the inner tie rods to relay rod retaining nuts.
