Express 2500 V8-6.6L DSL Turbo (2010)
Suspension Travel Bumper: Service and Repair
Rear Suspension
Spring Bumper Replacement (2500 W/8500/8600 GVW and 3500-9Q4)
Spring Bumper Replacement (2500 W/8500/8600 GVW and 3500-9Q4)
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Wheels and Tires/Vehicle Lifting/Service and Repair).
2. Support the vehicle with suitable safety stands.
3. Lift upward on the front side of the bumper.
4. Slide the rear axle bumper forward in order to free the bumper from the bracket.
Installation Procedure
1. Slide the bumper rearward.
2. Ensure that the rear axle bumper is seated into the bracket.
3. Remove the safety stands.
4. Lower the vehicle.
Spring Bumper Replacement (W/7300 GVW)
Spring Bumper Replacement (1500 and 2500 W/7300 GVW)
Removal Procedure