Express 2500 V8-6.6L DSL Turbo (2010)
7. Using the J 2222-C - wrench, and loosen the adjusting nut.
8. Remove the adjusting nut.
Note: If the oil seal remains on the axle hub, remove the seal using a suitable seal removal tool.
9. Remove the hub from the axle housing.
10. Remove the rotor, if necessary. Refer to Rear Brake Rotor Replacement (JH5, JH6) (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor Replacement (JH5, JH6))Rear Brake Rotor Replacement (JH9) (
See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and Replacement/Rear Brake Rotor
Replacement (JH9)).
11. Using a suitable seal removal tool, remove the oil seal from the wheel hub.
12. Remove the inner hub bearing.
