Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Antenna Mast: Service and Repair
Fixed Antenna Mast Replacement
Removal Procedure
Notice: Use tape on the tool surface so that you do not damage the paint on the antenna mast.
1. Unscrew the antenna mast.
2. Remove the antenna mast from the antenna base.
Installation Procedure
Important: Use tape on the tool surface in order to protect the paint on the antenna mast from damage.
1. Install the antenna mast to the antenna base.
Notice: Refer to Fastener Notice.
2. Screw the antenna mast to the antenna base.
Tighten the antenna mast to 5 N.m (44 lb in).