Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
1. Install the cable (1) to the vehicle.
2. Route the cable (1) from the cabin into the engine compartment.
3. Install the cable grommet into the bulkhead.
4. Install the cable handle (3) to the body.
5. Install the screws in order to retain the cable handle (3) to the body.
6. Install the left side hinge pillar trim panel to the body.
7. Install the cable (1) to the retainer on the radiator support.
8. Install the cable (1) to the hood latch.
9. Close the hood.