Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Parking Brake Shoe: Service and Repair
Park Brake Shoe Replacement (2500, 3500 Series)
Removal Procedure
Caution: Refer to Brake Dust Caution.
1. Disable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Disabling.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and the wheel.
4. Disconnect the park brake cable eye (2) from the park brake actuator lever (1).
5. Compress the park brake cable return spring (3) and release the park brake cable conduit from the backing plate (4) by pressing the locking tabs on
the cable conduit.
6. Remove the rear brake rotor.
7. Remove the park brake shoe hold down springs by compressing the spring and rotating the springs 1/4 turn to release.