Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement - Upper Left Side
Valve Rocker Arm Cover Replacement - Upper Left Side
Tools Required
J-46594 Fuel Injector Puller
Removal Procedure
1. Remove the positive crankcase ventilation (PCV) hose/pipe.
2. Disconnect the negative battery cables.
3. Remove the auxiliary generator, if equipped.
4. Remove the glow plug control module.
5. Remove the glow plug module bracket bolts (1) and bracket.
Notice: Label all the injector electrical connectors before the connectors are removed in order to prevent reconnecting to the wrong injector.
Failure to properly connect the injectors in the correct sequence will cause severe engine damage.
