Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
1. Remove the upper left valve rocker arm cover.
2. Remove the glow plug nuts.
3. Remove the engine wire harness at glow plugs.
4. Remove the fuel injectors.
5. Remove the fuel injectors return hose clamp at the left rear of engine (1).
6. Remove the fuel feed and return line clamp bolt.
7. Remove the lower valve rocker arm cover bolts.
8. Remove the lower valve rocker arm cover.
9. Remove the gasket from the lower valve rocker arm cover.
10. Inspect the lower valve rocker arm cover gasket for damage, replace if necessary. Otherwise reuse the old gasket.
Installation Procedure