Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
5. Install the fuel injectors return hose clamp at the left rear of engine (1).
6. Install the fuel feed and return line clamp bolt.
Tighten the bolt to 25 N.m (18 lb ft).
7. Install the fuel injectors.
8. Install the engine wire harness to glow plugs.
9. Install wires and nuts to glow plugs.
Tighten the nuts to 2 N.m (18 lb in).
10. Install the upper left valve rocker arm cover.
Valve Rocker Arm Cover Replacement - Lower Left Side (LMM)
Valve Rocker Arm Cover Replacement - Lower Left Side (LMM)
Removal Procedure
