Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Important: The center intake manifold lower nuts MUST be installed and tightened first.
4. Install the center intake manifold lower 2 nuts (2) and 2 bolts.
Tighten the nuts to 10 N.m (89 lb in).
5. Install the center intake manifold upper 4 bolts (1).
Tighten the bolts to 10 N.m (89 lb in).
6. Connect the engine wiring harness electrical connector to the IAT sensor No. 2.
7. Position the connector bracket and install the bolt (2) and nut (1).
Tighten the bolts to 15 N.m (11 lb ft).