Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
8. Install the fuel rail clamp bolt (2).
Tighten the bolt to 25 N.m (18 lb ft).
9. Install the connector bracket bolt (1).
Tighten the bolts to 15 N.m (11 lb ft).
10. Install the turbocharger.
Center Intake Manifold Replacement (LMM)
Center Intake Manifold Replacement (LMM)
Removal Procedure
1. Remove the turbocharger.
2. Loosen the connector bracket bolt and nut.
3. Remove the connector bracket bolt (1).
4. Remove the fuel rail clamp bolt (2).
