Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
8. Install the intake manifold tube bolts (2, 4) and nut (1).
Tighten the bolt/nut to 25 N.m (18 lb ft).
9. Install the EGR cooler water pipe bracket bolt (5).
Tighten the bolt to 15 N.m (11 lb ft).
10. Install the engine wiring harness clip bolt (3).
Tighten the bolt to 15 N.m (11 lb ft).
11. Install the engine wiring harness clip to the intake manifold tube.
12. Install the rear intake manifold tube nut (2).
Tighten the nut to 25 N.m (18 lb ft).