Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
19. Connect the engine harness electrical connector to the IAH.
20. Connect the engine harness electrical connector to the MAP sensor.
21. Install the engine cover.
22. Install the air cleaner outlet duct.
23. Connect the negative battery cable.
Intake Manifold Tube Replacement (LMM)
Intake Manifold Tube Replacement (LMM)
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the air cleaner outlet duct.
3. Remove the engine cover.
4. Disconnect the engine harness electrical connector (1) from the manifold absolute pressure (MAP) sensor.