Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
1. Position the turbocharger exhaust pipe.
Notice: Refer to Fastener Notice.
2. Tighten the turbocharger exhaust pipe clamp.
Tighten the turbocharger exhaust pipe clamp to 15 N.m (11 lb ft).
3. Position the turbocharger exhaust pipe to catalytic converter pipe clamp.
Tighten the turbocharger exhaust pipe to catalytic converter pipe clamp to 40 N.m (30 lb ft).
4. Install the turbocharger exhaust pipe to right exhaust pipe bracket bolt.
Tighten the turbocharger exhaust pipe to right exhaust pipe bracket bolt to 34 N.m (25 lb ft).