Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Notice: Refer to Fastener Notice.
5. Tighten the exhaust pipe bolts in the sequence shown.
Tighten the bolts to 53 N.m (39 lb ft).
6. Install the exhaust pipe heat shield bolts.
Tighten the bolts to 8 N.m (71 lb in).
7. Install the engine cover.
Exhaust Pipe Replacement - Left Side (6.6L (LMM))
Exhaust Pipe Replacement - Left Side (6.6L (LMM))
Removal Procedure
1. Remove the engine cover.
2. Remove the left exhaust pipe heat shield bolts (1).
3. Remove the heat shield.
