Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
18. Loosen the forcing screw. Remove the tool from the repaired line.
19. Verify that the LOK fitting is correctly installed.
20. Lower the vehicle.
21. Refill the coolant, if drained. Refer to Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair)Cooling System Draining and Filling (Vac N Fill) (See: Engine, Cooling and Exhaust/Cooling System/Service and
Repair).
22. Evacuate and recharge the refrigerant, if repairing the A/C lines. Refer to Refrigerant Recovery and Recharging (See: Heating and Air
Conditioning/Service and Repair/Refrigerant Recovery and Recharging).
Discharge Hose Replacement (6.6L)
Discharge Hose Replacement (6.6L)
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly.
3. Remove the air cleaner outlet duct.
4. Remove the discharge hose mounting bolt (1) from the A/C compressor.
5. Remove the discharge hose (4) from the A/C compressor.
