Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Notice: Label all the injector electrical connectors before the connectors are removed in order to prevent reconnecting to the wrong injector.
Failure to properly connect the injectors in the correct sequence will cause severe engine damage.
25. Install the engine wiring harness electrical connectors to the left fuel injectors.
26. Install the engine wiring harness to the left glow plugs and install the glow plug nuts (2).
Tighten the nuts to 1.7 N.m (15 lb in).
27. Position the left engine wiring harness bracket and install the bracket bolts (1).
Tighten the bolts to 10 N.m (89 lb ft).
28. Install the turbocharger vane position sensor.
29. Install the thermostat housing crossover.
30. Install the EGR cooler tube.
31. Connect the negative battery cable.
