Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position Sensor Replacement
Crankshaft Position Sensor Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
3. Remove the upper fan shroud.
4. Disconnect the crankshaft position (CKP) sensor electrical connector.
5. Remove the CKP sensor bolt.
6. Remove the CKP sensor.
7. If necessary, remove the CKP sensor spacer bolts.
8. If necessary, remove the CKP sensor spacer.
Installation Procedure
