Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
6. Position the bracket and install the nut and 2 bolts.
Connect the electrical connectors.
7. Install the fuel line bracket bolt.
Tighten the bolts to 25 N.m (18 lb ft).
8. Connect the fuel feed and return pipes.
9. Install the center intake manifold.
10. Install the charge air cooler inlet pipe.
11. Prime the fuel system. Refer to Fuel System Priming.
12. Start the engine.
If the engine does not start, repeat the above step.
13. Inspect the fuel system for fuel leaks.
14. Install the engine cover.
Fuel Hose Replacement - Fuel Filter/Heater Element Housing to Fuel Feed Block