Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
4. Position the glow module bracket to the valve cover, install the two bolts (2) and the remaining left bank fuel line bracket bolt (1).
1. Tighten the glow plug module bracket bolts to 10 N.m (89 lb in).
2. Tighten the fuel line bracket bolt to 25 N.m (18 lb ft).
5. Install the turbocharger heat shield (3) and EGR valve adapter pipe bracket (2).
6. Install the EGR valve adapter pipe bracket bolts (1).
Tighten the bolts to 9 N.m (80 lb in).
7. Position the EGR cooler pipe (4).
