Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
3. Install the glow plug control module.
4. Install the glow plug control module bolts.
Tighten the bolts to 10 N.m (89 lb in).
5. Connect the positive battery cable to the glow plug control module.
6. Connect the glow plug control module electrical connectors.
7. Install the charged air cooler hose/pipe assembly.
8. Connect the negative battery cable.
9. If a NEW glow plug control module was installed, program the module. Refer to Control Module References. See: Testing and
Inspection/Programming and Relearning
10. Install the engine cover.
