Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
10. Inspect the J 38826 and the appropriate pigtail adapter for damage. Replace as needed.
11. Short the 2 SIR deployment harness leads (1) together using one banana plug seated into the other.
12. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
13. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
14. Connect the inflator module (1) to the adapter (2) on the SIR deployment harness (3).
Important:
*
The rapid expansion of gas involved with deploying an inflator module is very loud. Notify all people in the immediate area that an
inflator module will be deployed.
*
When the inflator module deploys, the deployment fixture may jump vertically. This is a normal reaction of the inflator module due to the
force of the rapid expansion of gas inside the inflator module.
Clear the area of people.
16. Separate the 2 banana plugs on the SIR deployment harness.
