chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
A/T- Slips/Overheats/Won't Shift/MIL ON/DTCs P0218/P0894|Page 2358 > < A/T- Slips/Overheats/Won't Shift/MIL ON/DTCs P0218/P0894|Page 2356

Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)

Page 2
background image

Installation Procedure

Notice:  Refer to Fastener Notice.

1.  Install the turbocharger vane position sensor to the turbocharger.

Tighten the sensor to 28 N.m (21 lb ft).

2.  Install the turbocharger vane position sensor connector to the bracket located on the LH valve cover.

3.  Connect the turbocharger vane position sensor electrical connector.

4.  Install the thermal reflective shield/tape, refer to the following procedure.

Thermal Reflective Shield/Tape Installation

A/T- Slips/Overheats/Won't Shift/MIL ON/DTCs P0218/P0894|Page 2358 > < A/T- Slips/Overheats/Won't Shift/MIL ON/DTCs P0218/P0894|Page 2356