Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
6. Remove the auxiliary positive battery cable to crossmember clips (2).
7. Remove the auxiliary positive battery cable to engine harness clips (3).
8. Remove the auxiliary positive battery cable nut from the junction block.
9. Disconnect the auxiliary positive battery cable wiring harness clips.
10. Remove the auxiliary positive battery cable.
Installation Procedure
1. Position the auxiliary positive battery cable and connect the wiring harness clips.
Notice: Refer to Fastener Notice.
2. Position the auxiliary positive battery cable to the junction block and install the cable nut.
Tighten the auxiliary positive cable nut to 8 N.m (71 lb in).