Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
Alternator: Service and Repair
Generator Bracket Replacement (6.6L)
Generator Bracket Replacement (6.6L)
Removal Procedure
Caution: Refer to Battery Disconnect Caution .
1. Remove the cooling fan.
2. Remove the drive belt.
3. Disconnect the generator electrical connector.
4. Remove the positive battery cable from the generator, perform the following:
1. Slide the boot down to access the terminal stud.
2. Remove the positive cable nut.
3. Remove the positive cable.
5. Remove the generator bolts (1).
6. Remove the generator (2).
7. Disconnect the RH engine wiring main harness connector.
