Express 2500 V8-6.6L DSL Turbo VIN 2 (2007)
8. Position the generator.
9. Install the generator bolts (1).
Tighten the generator bolts to 50 N.m (37 lb ft).
10. Install the positive cable to the auxiliary generator, perform the following:
1. Install the positive cable.
2. Install the positive cable nut.
Tighten the positive cable nut to 9 N.m (80 lb in).
3. Slide the boot to cover the terminal stud.
11. Connect the generator electrical connector.
12. Install the drive belt.
13. Install the cooling fan.
